[TPR] Mach I engine progress

[B Hower]

JB,
Are you thinking it should show more ware or that do to age it should have already seen a bore job?
 Bud #3400 ( Drive it like there is no tomorrow -- for there may not be ! )



|  | Virus-free. www.avast.com  |

   

   From: John Bentley via TPR <tpr at teampanteraracing.com>
 To: tpr at teampanteraracing.com; Asa Jay Laughton <asajay at asajay.com> 
 Sent: Tuesday, November 21, 2017 4:18 PM
 Subject: Re: [TPR] Mach I engine progress
  
 well that's interesting since the original factory bore is 4.000 ! :)
How are you measuring ?  What type of tool are you using?
JB


    On Tuesday, November 21, 2017, 1:48:50 PM PST, Asa Jay Laughton via TPR <tpr at teampanteraracing.com> wrote:  
 
  A quick mic check of all cylinders just under the ridge shows between 4.003 and 4.006, depending on the hole.
 
 Asa  Jay
 Asa Jay Laughton - W7TSC, MSgt, USAFR, Retired
Spokane County ARES-RACES Net Manager
******************************     
http://w7tsc.org
http://www.teampanteraracing.com 
 On 11/21/2017 12:12 PM, John Bentley via TPR wrote: 
  I would say that stock nodular iron crank is good for 500 hp for sure.  I would use it. 
  John  
 
 _______________________________________________
TPR mailing list
TPR at teampanteraracing.com
http://teampanteraracing.com/mailman/listinfo/tpr_teampanteraracing.com
  _______________________________________________
TPR mailing list
TPR at teampanteraracing.com
http://teampanteraracing.com/mailman/listinfo/tpr_teampanteraracing.com


   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://teampanteraracing.com/pipermail/tpr_teampanteraracing.com/attachments/20171122/467c0d69/attachment-0003.html>