[TPR] Mach I engine progress

[DENNIS ANTENUCCI]

He borrowed my equipment
😂🥃🥃

Sent from my iPhone

> On Nov 21, 2017, at 2:17 PM, John Bentley via TPR <tpr at teampanteraracing.com> wrote:
> 
> well that's interesting since the original factory bore is 4.000 ! :)
> 
> How are you measuring ?  What type of tool are you using?
> 
> JB
> 
> 
> 
> On Tuesday, November 21, 2017, 1:48:50 PM PST, Asa Jay Laughton via TPR <tpr at teampanteraracing.com> wrote:
> 
> 
> A quick mic check of all cylinders just under the ridge shows between 4.003 and 4.006, depending on the hole.
> 
> Asa  Jay
> Asa Jay Laughton - W7TSC, MSgt, USAFR, Retired
> Spokane County ARES-RACES Net Manager
> ******************************     
> http://w7tsc.org
> http://www.teampanteraracing.com
> 
>> On 11/21/2017 12:12 PM, John Bentley via TPR wrote:
>> I would say that stock nodular iron crank is good for 500 hp for sure.  I would use it.
>> 
>> John
>> 
> 
> _______________________________________________
> TPR mailing list
> TPR at teampanteraracing.com
> http://teampanteraracing.com/mailman/listinfo/tpr_teampanteraracing.com
> _______________________________________________
> TPR mailing list
> TPR at teampanteraracing.com
> http://teampanteraracing.com/mailman/listinfo/tpr_teampanteraracing.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://teampanteraracing.com/pipermail/tpr_teampanteraracing.com/attachments/20171121/edf73bba/attachment-0003.html>