[TPR] Fwd: Big Numbers - JB’s Dyno Run

[DENNIS ANTENUCCI]

Sounds like an awesome build Lee. Wotz your schedule to complete?

As Asa says, be sure you share dyno and photos otherwise its not real.
Kidding.

MD

Sent from my iPhone

Begin forwarded message:

> From: Lee Pedersen <salemmotorsport at yahoo.com>
> Date: October 23, 2021 at 11:03:23 AM PDT
> To: DENNIS ANTENUCCI <TEAMPANTERA at yahoo.com>
> Cc: Asa Jay <asajay at asajay.com>
> Subject: Re: [TPR] Big Numbers - JB’s Dyno Run
> Reply-To: Lee Pedersen <salemmotorsport at yahoo.com>
> 
> 
> The 2nd trick flow head came in last week.  I was going to get a cam recommendation from from Comp or other manuf.  Rods rods are already ARP equipped and oil pump is high flow and custom shimmed by me for a little higher pressure.  The billet aluminum rockers will be inspected from Milodon worked vey well, not worried about a hp loss from the modification.  Will inspect pump and safty wire..  I got a Jesel rocker arm support kit to install.  I like high rpm valve control and will probably not go stroker just because I will trust Ford's piston rod to crank geometry.  I guess I will by an aftermarket damper as I have a big$ credit from Summit for buying the heads.  The current build did take 7,000 rpm pulls occasionally so I will keep bearing clearances and continue using 20-50 Mobile I with 6 quarts instead of five.  I think I will find failed and fuel pump filled crankcase with gas and crank and bearing will be fine but will put in new ones.
> 
>  I will build it with lots of  LOVE just for you!!
> 
> 
> Best Regards, Lee Pedersen, Pres. Salem Motorsports Inc. 503-371-4200 3650 Portland Rd NE Salem, OR 97301   
> 
> 
> On Saturday, October 23, 2021, 10:39:56 AM PDT, DENNIS ANTENUCCI via TPR <tpr at teampanteraracing.com> wrote:
> 
> 
> Impressive numbers…Wots your build sheet homey? I know of at least 3 owners planning builds.
> 
> MD
> 
> Sent from my iPhone
> 
> > On Oct 23, 2021, at 10:34 AM, John Bentley via TPR <tpr at teampanteraracing.com> wrote:
> > 
> > I’m getting excited to get it in the car. Last dyno pull was 531HP from standard bore 351 CI. I do need a new carb but I’m still pretty happy with it 
> > 
> > Sent from my iPhone
> > 
> >> On Oct 23, 2021, at 10:24 AM, DENNIS ANTENUCCI via TPR <tpr at teampanteraracing.com> wrote:
> >> 
> >> Some big HP/TQ numbers on John’s Cleveland. 
> >> Well done John. 
> >> Awesome!!
> >> <image0.jpeg>
> >> 
> >> 
> >> MD
> >> 
> >> _______________________________________________
> >> TPR mailing list
> >> TPR at teampanteraracing.com
> >> http://teampanteraracing.com/mailman/listinfo/tpr_teampanteraracing.com
> > 
> 
> 
> _______________________________________________
> TPR mailing list
> TPR at teampanteraracing.com
> http://teampanteraracing.com/mailman/listinfo/tpr_teampanteraracing.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://teampanteraracing.com/pipermail/tpr_teampanteraracing.com/attachments/20211023/2cd9da61/attachment.html>