[TPR] The Good, the bad and the ugly . . .

[Mad Dog Antenucci]

I know Kirby will weigh in here but he also hasn't driven his Pantera in 10 years....okay seems like 10 years now that he has the fancy schmantzy Ford GT replica! ;-)

I Iove my Com cams hyd roller.....will never go back to solid lifters  unless its a race car and my Pantera is not a race car. Its a family car which occasionally sees some autobahn speeds... ;-)>

Ref Hyd Comp Cam 32-651-8....Duration 245 and .612 lift.......with a 10 over Cleveland block, 302B heads, IR-EFI, 180's and 11:1 comp on a 381 stroker we made max power of 503RWHP @ 6,000 and 477RWTQ....we kept R's at limit of 6,000 and made max torque at 5200 R

On previous 381ci stroker rebuilt 4 years earlier with the same build EXCEPT using a Holly 830 cfm and Rosch hi rise we made 445 RWHP but made max 391TQ at 4900 R's...REVING to 6300 R's. 

Honestly, I could not tell the difference in power....and dyno power don't mean squat...Mike Trusty said the same stroker with EFI wouldn't sound as good meaning the EFI smoothed out the cam allot....lost the rumpty rump going to IR-EFI system but I still love it....


________________________________
 From: David in Durango <adin at frontier.net>
To: Kirby Schrader <kirby.schrader at gmail.com> 
Cc: TPR List <tpr at teampanteraracing.com> 
Sent: Thursday, March 29, 2012 10:56 AM
Subject: Re: [TPR] The Good, the bad and the ugly . . .
 

  
Thanks for the "encouragement" Mr. Kirby!
 
This morning I'm thinking a hydraulic roller would be 
nice . . .  any good ideas for a cam/lifter replacement?  I'm open to 
suggestions/ideas/theories.
 
thanks!
 
david
----- Original Message ----- 
>From: Kirby  Schrader 
>To: David in Durango 
>Cc: TPR List 
>Sent: Thursday, March 29, 2012 11:42  AM
>Subject: Re: [TPR] The Good, the bad and  the ugly . . .
>
>Sounds like a typical Pantera engine tear down... 
unfortunately. 
>
>
>
>On Thu, Mar 29, 2012 at 12:28, David in Durango <adin at frontier.net> wrote:
>
> 
>>Hi kids,
>> 
>>Thought I would share some fun  . . . 
>> 
>>Opened the Cleveland yesterday.  My hope was to re-ring and  check everything.  15K mile motor and time to set the valves anyway as  they are making some noise (duh.)
>> 
>>I was told this is a 440hp motor.  It dynoed 325 rwhp @6000rpm  (and not near peak).  It has always blown oil.
>>One plug was pretty oily when removed (#8).  #1 piston had all the  ring gaps nicely lined up . . . .   #8 cylinder showed NO sign of  a crosshatch pattern.
>> 
>>Bearings: some wear noted, definately want to replace these.  Also  some sign of dirt in oil!
>> 
>>When I pulled the pan I noticed gasket paper and glyptol chips  stuck to the oil screen, along with some pieces of metallic debris.   Not a good sign?
>> 
>>Anyway, pulled the crank and set it aside only to find 2 lobes of the  cam shot  - now I get to buy a new cam!!!
>> 
>>so, that is the status of fun and games in Colorado . . . . 
>>David
>>_______________________________________________
>>TPR 
    mailing list
>>TPR at teampanteraracing.com
>>http://lists.teampanteraracing.com/cgi-bin/mailman/listinfo/tpr
>>
>>
>
>________________________________
> _______________________________________________
>TPR mailing 
  list
>TPR at teampanteraracing.com
>http://lists.teampanteraracing.com/cgi-bin/mailman/listinfo/tpr
>
>
>
>__________ 
  Information from ESET Smart Security, version of virus signature database 7011 
  (20120329) __________
>
>The message was checked by ESET Smart 
  Security.
>
>http://www.eset.com
>
>

__________ Information from ESET Smart Security, version of virus signature database 7011 (20120329) __________

The message was checked by ESET Smart Security.

http://www.eset.com

_______________________________________________
TPR mailing list
TPR at teampanteraracing.com
http://lists.teampanteraracing.com/cgi-bin/mailman/listinfo/tpr
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://teampanteraracing.com/pipermail/tpr_teampanteraracing.com/attachments/20120329/55f28fb4/attachment-0003.html>