[TPR] Grommet (near wiper motor) for wire loom to car front

[B Hower]

FWIW:
 
I found that a Chrysler PCV grommet ( O'Reilly # 42344 ) will fit the wire loom ( that feeds front of car ) and it's hole. Just cut out 3/8" at OD to 1/4" at ID. The inside of hole lip is smaller than the outside of hole lip making installation easier. I than chose to apply a little silicone at grommet OD and cut for added sealing.
 
Bud #3400
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://teampanteraracing.com/pipermail/tpr_teampanteraracing.com/attachments/20120718/42e1c62a/attachment-0002.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Grommet lights etc cable.jpg
Type: image/pjpeg
Size: 285498 bytes
Desc: not available
URL: <http://teampanteraracing.com/pipermail/tpr_teampanteraracing.com/attachments/20120718/42e1c62a/attachment-0006.bin>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: DSC05996-a.jpg
Type: image/pjpeg
Size: 473165 bytes
Desc: not available
URL: <http://teampanteraracing.com/pipermail/tpr_teampanteraracing.com/attachments/20120718/42e1c62a/attachment-0007.bin>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: DSC06000-a.jpg
Type: image/pjpeg
Size: 457014 bytes
Desc: not available
URL: <http://teampanteraracing.com/pipermail/tpr_teampanteraracing.com/attachments/20120718/42e1c62a/attachment-0008.bin>