Team Pantera Racing

P9060013

- Clutch lever arm installed on spline closest to slave cylinder.
- Pushrod adjusted to be shortest possible.
- freeplay screw backed all the way out to not cause interference.
- External return spring installed.
- Clutch pictured in "relaxed" position.
- Bleed screw on slave open to cause no restrictions.

In this photo, the clutch throw out bearing is being held tight against the pressure plate fingers. Although there is room for the slave piston to travel back, the spring pressure (of the internal spring on the slave) is enough to press the lever arm against the clutch pressure plate fingers. See the next series of photos.

Photo info