[TPR] 4 TO 4.5 NEG CASTER WITH PPC

ehpantera ehpantera at yahoo.com
Tue Apr 5 16:29:17 PDT 2022


Chuck, Right now I have 6.5 77 degrees of carter.  I'm happy with that..Mark Sent from my Galaxy
-------- Original message --------From: Charles Engles <cengles at cox.net> Date: 4/5/22  9:00 AM  (GMT-05:00) To: 'ehpantera' <ehpantera at yahoo.com> Cc: tpr at teampanteraracing.com Subject: RE: [TPR] 4 TO 4.5 NEG CASTER WITH PPC Dear Mark,                      I am sure that Johnny’s modified A arms are solid and well done.   Are you using any other methods to increase positive caster?    What is the current positive caster?                                Curious,  Chuck Engles  From: TPR [mailto:tpr-bounces at teampanteraracing.com] On Behalf Of ehpantera via TPRSent: Monday, April 04, 2022 7:55 PMTo: DENNIS ANTENUCCI; Charles Engles via TPRSubject: Re: [TPR] 4 TO 4.5 NEG CASTER WITH PPC I'm using Johnny Woods modified A arms and am happy with them. Mark    Sent from my Galaxy  -------- Original message --------From: DENNIS ANTENUCCI via TPR <tpr at teampanteraracing.com> Date: 4/4/22 7:17 PM (GMT-05:00) To: Charles Engles via TPR <tpr at teampanteraracing.com> Subject: Re: [TPR] 4 TO 4.5 NEG CASTER WITH PPC  Hi Doc….thanks…Yea I am definitely looking at both. Although I hear there is a better unit out there which Asa is looking at for me. 👍🏼 DennisSent from my iPhoneOn Apr 4, 2022, at 1:39 PM, Charles Engles via TPR <tpr at teampanteraracing.com> wrote:Dear Dennis,                  How much positive caster do you have now?   I am keen to know if you will perceive a difference and improvement.                   I would note that our friend Tom Upton was running positive 5-7 degrees and he noted another bit of improvement with the SACC electric power steering unit.  If Tom recommends power steering with big positive castor, then it might be a consideration.                             Warmest regards, Chuck Engles From: TPR [mailto:tpr-bounces at teampanteraracing.com] On Behalf Of DENNIS ANTENUCCI via TPRSent: Monday, April 04, 2022 2:39 PMTo: tpr at teampanteraracing.comSubject: [TPR] 4 TO 4.5 NEG CASTER WITH PPC Afternoon TPR FWIW While I already purchased Johnny Woods modified A-Arms where I hope to get 5-7 degrees neg caster…..here is Larry’s mods where he got 4 to 4.5 neg caster.  Dennis Sent from Mail for Windows From: Larry StockSent: Monday, April 4, 2022 10:48 AMTo: DENNIS ANTENUCCISubject: Re: QUARTER WINDOW RUBBERS I got 4 & 4.5 degrees of caster with the offset bushings and shaving the upper front ball joint.02001PPPC Front Upper Ball Joint Modified for + Caster135.00I think the Pantera may want up to 6-9 degrees of front caster.Here are the A-Arm Sectioning and spacer photo’s I have you can work with. Do you have ASA’s Address handy? Larry StockPantera Parts Connection LC550 Mallory WayCarson City NV 89701www.PanteraParts.comPH  775-283-4411Fax 775-283-4410Cell 1-800-DeTomaso 800-338-6627    On Apr 4, 2022, at 10:23 AM, Larry Stock <larrys at panteraparts.com> wrote:I have both, I assume you probably want a good used one.Larry Regarding my Pantera underside downforce work, Here is an excerpt fromhttps://www.hagerty.com/media/motorsports/are-f1-and-nascar-manufacturing-drama/?utm_source=SFMC&utm_medium=email&utm_content=MED_UN_NA_EML_UN_SaturdayRoadTrip&hashed_email=fb1f43ec025e8215388f0ce0823a6e37e643701df67837453081ee2c33561ece For the first time since the 1980s, when F1 cars resembled upside-down airplanes, ground effects are utilized in the aero regulations for the new car. Its floor has two large channels running front-to-back. Air travels under the vehicle and through the Venturi-shaped channels, which creates an area of low pressure and “sucks” the car to the track. Since the underside of the car provides much of the grip, the need for air on the wings to generate downforce is reduced.     
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://teampanteraracing.com/pipermail/tpr_teampanteraracing.com/attachments/20220405/0b404876/attachment-0002.html>


More information about the TPR mailing list