[TPR] Mach I engine progress

[DENNIS ANTENUCCI]

ME?
Fucked up jet leg.
Siri even asked WTH did I really mean.🙄

Cool on progress and we will have to work it out so I can supervise and we can drink some whiskey together next month and celebrate holidays

Sent from my iPhone

> On Nov 21, 2017, at 11:39 AM, John Bentley <gndplne at yahoo.com> wrote:
> 
> winter projects on the picture?  Translate please....
> 
> I've repaired the bell housing and I'm ready to re-install the transaxle in my Pantera.  Busy with Thanksgiving now and moving my 207 to San Jose hangar, but should get it done before the end of the year.
> 
> DaWg, are you in jail over there?  How is your honemoon going?
> 
> JB
> 
> 
> 
> 
> On Tuesday, November 21, 2017, 11:18:30 AM PST, DENNIS ANTENUCCI via TPR <tpr at teampanteraracing.com> wrote:
> 
> 
> Good points JB but tell us about your winter projects on the picture😉
> 
> Sent from my iPhone
> 
>> On Nov 20, 2017, at 9:08 PM, John Bentley via TPR <tpr at teampanteraracing.com> wrote:
>> 
>> this is my favorite part:
>> 
>> "this will need 0.030 over at minimum but we'll try for 0.010 
>> if we can.  I've not measured anything yet."
>> 
>> Asa, please forward the CA lottery numbers to me privately. :)
>> 
>> At least it's spinning, so that is a good sign.  Since its a 2V intake and heads, are you thinking new heads and intake?  Probably doesn't have a 4MA crank, but maybe!  Have you settled on a build with Dan?
>> 
>> JB
>> 
>> 
>> 
>> 
>> On Monday, November 20, 2017, 4:40:15 PM PST, Asa Jay Laughton via TPR <tpr at teampanteraracing.com> wrote:
>> 
>> 
>> Hi all,
>> Today, Sam and I attacked the 351C donor for the Mach I.  Yuck, is the 
>> word for the day.  Thick sludgy and smelly oil.  A distributor that is 
>> really stuck, a cam gear that refuses to come off, and a cam that won't 
>> come out.  Small problems overall, but the engine turns.  My guess right 
>> now is that this will need 0.030 over at minimum but we'll try for 0.010 
>> if we can.  I've not measured anything yet.
>> 
>> We still need to get the pan off, rods/pistons out and remove the 
>> crank.  Then we'll work on getting the cam and distributor out.
>> 
>> In several months, we need to compare these shots against the pretty 
>> finished product.  :)
>> Asa  Jay
>> 
>> -- 
>> Asa Jay Laughton - W7TSC, MSgt, USAFR, Retired
>> Spokane County ARES-RACES Net Manager
>> ******************************
>> http://w7tsc.org
>> http://www.teampanteraracing.com
>> 
>> 
>> _______________________________________________
>> TPR mailing list
>> TPR at teampanteraracing.com
>> http://teampanteraracing.com/mailman/listinfo/tpr_teampanteraracing.com
>> _______________________________________________
>> TPR mailing list
>> TPR at teampanteraracing.com
>> http://teampanteraracing.com/mailman/listinfo/tpr_teampanteraracing.com
> 
> _______________________________________________
> TPR mailing list
> TPR at teampanteraracing.com
> http://teampanteraracing.com/mailman/listinfo/tpr_teampanteraracing.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://teampanteraracing.com/pipermail/tpr_teampanteraracing.com/attachments/20171121/850a5b09/attachment-0003.html>