[TPR] Ball size

[mark skwarek]

JB,
The throttle ball size is 0.300" Dia. 
Mark


On ‎Wednesday‎, ‎August‎ ‎30‎, ‎2017‎ ‎12‎:‎59‎:‎03‎ ‎AM, mark skwarek via TPR <tpr at teampanteraracing.com> wrote:

JB,
I'll have it for you in the morning.
Mark


On ‎Tuesday‎, ‎August‎ ‎29‎, ‎2017‎ ‎11‎:‎50‎:‎05‎ ‎PM, John Bentley via TPR <tpr at teampanteraracing.com> wrote:

Anyone still using the stock throttle cable?  Can you pop off the cable and measure the ball size? My dyno shop sent my carb for a quick check/overhaul and i think they used a different size ball on the dyno. The ball stud on the carb is loose now (it measures 1/4 inch) so i will tell them what size it should be and swap it out. Again, after rebuilding my own carbs for a gazillion years, i trusted a carb shop. Dumb. 

JB 

Sent from my iPhone

_______________________________________________
TPR mailing list
TPR at teampanteraracing.com
http://teampanteraracing.com/mailman/listinfo/tpr_teampanteraracing.com
_______________________________________________
TPR mailing list
TPR at teampanteraracing.com
http://teampanteraracing.com/mailman/listinfo/tpr_teampanteraracing.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://teampanteraracing.com/pipermail/tpr_teampanteraracing.com/attachments/20170830/88fbe523/attachment-0003.html>