[TPR] Dawgs car

[John Bentley]

could be a high impedance in the amp gauge.  Try bypassing the gauge (remove output wire and connect to input terminal).  Then recheck charge voltageover 15 is too high.  14.4 max

      From: Asa Jay Laughton via TPR <tpr at teampanteraracing.com>
 To: Dennis Antenucci <teampantera at yahoo.com> 
Cc: mark skwarek Skwarek <ehpantera at yahoo.com>; Peter Menyhart <pmenyhart at msn.com>; team pantera racing <tpr at teampanteraracing.com>
 Sent: Wednesday, September 14, 2016 1:16 PM
 Subject: [TPR] Dawgs car
   
At the patient,12.5V and car starts.  15.5V charging while running, seems high to me.  11.5V or so during start.  Amp gauge is shot or something.  Its pegged at full charge with battery disconnected or connected and running.
Ideas?Asa
Sent using Jedi Mind Tricks
_______________________________________________
TPR mailing list
TPR at teampanteraracing.com
http://teampanteraracing.com/mailman/listinfo/tpr_teampanteraracing.com


   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://teampanteraracing.com/pipermail/tpr_teampanteraracing.com/attachments/20160914/5d634fae/attachment-0003.html>