[TPR] Pantera Values

mark skwarek ehpantera at yahoo.com
Thu Jul 23 18:12:03 PDT 2015


John,
You might want to check out  http://www.ausfordparts.com/.They claim to have 2 bolt std. bore blocks.
Mark 


     On Thursday, July 23, 2015 4:57 PM, John Bentley via TPR <tpr at teampanteraracing.com> wrote:
   

 what?  Bud, Is this true?
JB
      From: Bob Radefeld <bob at radefeld.com>
 To: John Bentley <gndplne at yahoo.com> 
Cc: Mad Dog Antenucci <teampantera at yahoo.com>; Asa Jay Laughton <asajay at asajay.com>; TPR Forum <tpr at teampanteraracing.com> 
 Sent: Thursday, July 23, 2015 1:25 PM
 Subject: Re: [TPR] Pantera Values
   

JB, it sounds like you need to get in touch with Bud Hower (#3400) as he's got lots of the standard bore type Cleveland blocks he has collected over the years............
Rowdy 
On Thu, Jul 23, 2015 at 1:01 PM, John Bentley via TPR <tpr at teampanteraracing.com> wrote:



I want standard bore because I need to machine it to get a clean bore.  You can't start with a 30-over block and get something that will make a lot of power if it has to be bored again and ends up at 40 or more over.  Not a got recipe for a Cleveland
JB
      From: Mad Dog Antenucci via TPR <tpr at teampanteraracing.com>
 To: Asa Jay Laughton <asajay at asajay.com>; John Bentley <gndplne at yahoo.com> 
Cc: TPR Forum <tpr at teampanteraracing.com> 
 Sent: Thursday, July 23, 2015 10:05 AM
 Subject: Re: [TPR] Pantera Values
   
Can you have them sonic tested? He also wants std bore.
 

     From: Asa Jay Laughton <asajay at asajay.com>
 To: John Bentley <gndplne at yahoo.com> 
Cc: Dennis Antenucci <teampantera at yahoo.com>; TPR Forum <tpr at teampanteraracing.com> 
 Sent: Thursday, July 23, 2015 9:44 AM
 Subject: Re: [TPR] Pantera Values
   
I have three fully assembled engines of unknown use and condition sitting in Bullet's barn.  They are all most likely 2-bolt blocks and all have 2V heads.  If you are really desperate for a block, I might be able to find time to tear one or more down to mic the bores before SSCC.  Then, assuming I find one suitable, we could haul it in the truck to Ely.
Asa Jay

Sent using Jedi Mind Tricks

John Bentley via TPR <tpr at teampanteraracing.com> wrote:



DaWg,
I'll sell ya ol' yeller for 58,000, but it doesn't have an engine in it right now so I'll plan to push you around the block for the test drive.
JB - looking for a block


      From: Mad Dog Antenucci via TPR <tpr at teampanteraracing.com>
 To: TPR Forum <tpr at teampanteraracing.com> 
 Sent: Thursday, July 23, 2015 7:48 AM
 Subject: [TPR] Pantera Values
   
Guys & Ms. Laurie,
I spoke to Haggerty folks (JB & Frank) today about renewal (JB & Frank) and they said average selling price for a pantera (JB & Frank) in good condition is $58 grand! (JB & Frank)....$58,000 bucks....Where have I been?
So for (JB  any Frank) of you slackers (JB & Frank who ain't driving your Pantera anymore NOW is the time to sell before the next recession starts.
Biblical (AJ) trend on economy is 7 years up and 7 years down. 
Tim to sell is right NOW....after SORC and SSCC of course. ;-)
_______________________________________________
TPR mailing list
TPR at teampanteraracing.com
http://teampanteraracing.com/mailman/listinfo/tpr_teampanteraracing.com


   

   
_______________________________________________
TPR mailing list
TPR at teampanteraracing.com
http://teampanteraracing.com/mailman/listinfo/tpr_teampanteraracing.com


   
_______________________________________________
TPR mailing list
TPR at teampanteraracing.com
http://teampanteraracing.com/mailman/listinfo/tpr_teampanteraracing.com





   
_______________________________________________
TPR mailing list
TPR at teampanteraracing.com
http://teampanteraracing.com/mailman/listinfo/tpr_teampanteraracing.com


  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://teampanteraracing.com/pipermail/tpr_teampanteraracing.com/attachments/20150724/66931f55/attachment-0003.html>


More information about the TPR mailing list