[TPR] Asa's 3310-2 carb rebuild

[Asa Jay Laughton]

Alright gang, here we go.  This will of course take a few days due to 
other things that will invariably get in the way, like the fact a one 
gallon can of carb clean will -not- fit a Holley throttle body or base 
plate through the opening in the top.  So, as I did some 20 years ago, 
I'll buy the five gallon container, it works a whole lot better.

Today, I completely disassembled the carb.  I'll have more details and 
photos posted to the TPR site later.  For now, I found it has #72 jets 
in the primary circuit and #76 in the secondary.  Both power valves are 
#65 (meaning they cut in at about 6.5" of vacuum).  The throttle plate 
appears to -not- have the check valves for preventing power valve 
blow-out.  I found info on that mod and will see if this base plate can 
take that mod.

The gaskets were definitely dry, it took a bit of patience to separate 
all the pieces but I did manage.  I checked and most all the parts I 
need to do the rebuild are not to be found locally so I'll be placing an 
order with Summit shortly.

Are we having fun yet?  :)
Asa  Jay

-- 
Asa Jay Laughton - W7TSC, MSgt, USAFR, Retired
&  Shelley Marie
Spokane, WA
******************************
http://www.racingagainstautism.com
http://www.teampanteraracing.com
http://facebook.com/racingagainstautism