[TPR] Fw: Cam

[teampantera]

He's waiting for your check ;-)


Sent via the Samsung Galaxy S™ III, an AT&T 4G LTE smartphone

-------- Original message --------
From: Steven Donegan via TPR <tpr at teampanteraracing.com> 
Date:  
To: John Bentley <gndplne at yahoo.com>,TPR Forum <tpr at teampanteraracing.com> 
Subject: Re: [TPR] Fw: Cam 
 
I expect this might be heresy - but why wouldn't you scrap the block and go with something like the DART 351C aluminum block?
 
____________
Steven Donegan
KK6IVC
SSCC/NORC Life Member, Car #86
www.sscc.us

From: John Bentley via TPR <tpr at teampanteraracing.com>
To: TPR Forum <tpr at teampanteraracing.com> 
Sent: Sunday, November 16, 2014 6:45 PM
Subject: [TPR] Fw: Cam

it's wasted. You can see the lifter in the center of this picture is so far into the block it has uncovered the lifter oil hole!  That is why we had low oil pressure on course at SSCC!  The lifter bottom is damaged and won't come out, so the only hope of using this block is to remove the cam and then get the lifters out of the cam bore.  I'm just going to pull the engine and drop it off at the builder and see what he can do.

JB





Sent from my iPhone


_______________________________________________
TPR mailing list
TPR at teampanteraracing.com
http://teampanteraracing.com/mailman/listinfo/tpr_teampanteraracing.com


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://teampanteraracing.com/pipermail/tpr_teampanteraracing.com/attachments/20141116/a893e6d3/attachment-0003.html>