[TPR] Testing runout on new wheels

[Mad Dog Antenucci]

Cool. you running to run a lowered Pantera?


________________________________
 From: Asa Jay Laughton <asajay at asajay.com>
To: tpr at teampanteraracing.com 
Sent: Saturday, July 7, 2012 8:26 PM
Subject: [TPR] Testing runout on new wheels
 
Tested the runout on the new wheels tonight.  Set up my dial indicator 
parallel to the line of travel at the center of the rim just behind the 
lip where the bead would seat.  These are the results.

Max on one of the 18" wheels was about 0.040"
The other 18" wheel was about 0.025"

Both of the 17" wheels were about 0.010"


Without a wheel attached, I measured the runout of the axle flange and 
got about 0.004"


I got a shipping notification that my new radiator and the new rings are 
on the way.  I'm traveling next Tuesday so I probably won't be picking 
up the block and heads until next Friday after I get back.

Asa Jay

Asa Jay Laughton, MSgt, USAFR, Retired
&  Shelley Marie
Spokane, WA
******************************
http://www.racingagainstautism.com
http://www.teampanteraracing.com
http://facebook.com/racingagainstautism


_______________________________________________
TPR mailing list
TPR at teampanteraracing.com
http://lists.teampanteraracing.com/cgi-bin/mailman/listinfo/tpr
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://teampanteraracing.com/pipermail/tpr_teampanteraracing.com/attachments/20120708/a14aaf1c/attachment-0003.html>