[TPR] The 7 Banger tear down (A)

[Asa Jay Laughton]

Bud,

So far so good.  You need to get that piston out and see what's up.  
Great photos, reminds me I need to tear down the rest of mine too.

Asa Jay

Asa Jay Laughton, MSgt, USAFR, Retired
&  Shelley Marie
Spokane, WA
******************************
http://www.racingagainstautism.com
http://www.teampanteraracing.com
http://facebook.com/racingagainstautism


On 4/23/2011 9:19 PM, B Hower wrote:
> Photos of my findings:
> 4123 = #2 intake  -----  intake side of gasket
> 4124 = #1 and #2 intake ---- intake side of gasket
> 4125 = #2 intake --- head side of gasket
> 4126 = #2 lifters and all thread
> 4127 = #2 guide plate and all thread
> 4136 = #2 valve seals
> 4137 = #2 valve seals and single groove ss valves
>
> 4138 = two springs plus damper
> 4139 = #2 bore and piston top
>
> I can't say there was any thing wrong with intake gasket sealing.
> 4126 shows I got lucky on my patch/fix job as the all thread jammed 
> lifters. Both lifters push rod cup was laying in the valley along with 
> one broken retainer clip etc. ( how the one cup got out of there and 
> it's clip still in the lifter I don't know )
> There is no hole in the piston.
> I see nothing wrong with the valve guide seals.
> So there must be a ring problem.
> Bud #3400 (The 7 Banger)
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://teampanteraracing.com/pipermail/tpr_teampanteraracing.com/attachments/20110423/30655105/attachment-0003.html>